Bragproof

← Reports

canvas-lms-mcp-local

Starts with no setup1.4.0npm

Installed, started with no arguments, no environment and no input, and listed its tools. Run 2026-11-16.

Needs to start: nothing
Returns a result when called with no setup: 1 of 5 tools tried
Contacts while installing and starting: nothing

200tools listed
0hosts contacted
0files written
0.3 sto start
110dependencies

Its tool definitions changed since version 1.3.0. If you approved the earlier ones, read them again.

What it contacted

Nothing besides the npm registry it was installed from. Watched from outside its sandbox while it was installed and started with no input. Its tools may still contact things when called.

Starting it

npx -y canvas-lms-mcp-local@1.4.0

Installing a package runs its code. Use a sandbox for anything you have not read.

Calling its tools

5 tools that take no input and look read-only were called once with nothing. 1 returned a result.

whoamiNo usable answer tool reported an error: CANVAS_API_TOKEN is not set. Add it to your AI app's Canvas settings, or run: npx canvas-lms-mcp-local setup. On Windows, the free Canva
get_my_profileNo usable answer tool reported an error: CANVAS_API_TOKEN is not set. Add it to your AI app's Canvas settings, or run: npx canvas-lms-mcp-local setup. On Windows, the free Canva
get_my_settingsNo usable answer tool reported an error: CANVAS_API_TOKEN is not set. Add it to your AI app's Canvas settings, or run: npx canvas-lms-mcp-local setup. On Windows, the free Canva
get_rate_limit_statusReturned a result under 0.1 s · 253 characters
list_my_enrollmentsNo usable answer tool reported an error: CANVAS_API_TOKEN is not set. Add it to your AI app's Canvas settings, or run: npx canvas-lms-mcp-local setup. On Windows, the free Canva

During the calls it contacted nothing it had not already contacted.

Only tools whose names read like looking something up, with no required input, are tried, five at most. Tools that need input, and anything that sounds like it changes or sends something, are not called.

What its tools tell an agent

In the tool descriptions, nothing that talks about the user, other tools or private files, or uses hidden characters.

Found by simple pattern rules in each tool's description (up to 3,000 characters), quoted as written. Parameter descriptions are not scanned. A clean result is not a safety review.

Tools

whoami
Get your Canvas user ID, name and login. Read-only and very cheap. Use it to confirm the token works; use get_my_profile for bio and email, or test_connection for a full diagnostic.
get_my_profile
Get your full Canvas profile: name, bio, avatar, primary email and calendar feed URL. Read-only. For just your ID and name, whoami is cheaper.
get_my_settings
Get your account-level Canvas preferences, such as dashboard view, activity stream visibility and comment notification settings. Read-only. For how often you are notified about each event, use get_notification_preferences.
check_token_expiry
Check when your Canvas access token expires and warn if it is close. Read-only. Canvas often forces student tokens to expire after 30–120 days without warning, so run this at the start of a term.
get_rate_limit_status
Report Canvas rate-limit state from the most recent API call: remaining quota, last request cost and requests this session. Read-only and makes no Canvas call itself. Canvas throttles by cumulative request cost, so check this before expensive tools like semester_snapshot.
195 more tools
list_my_enrollments state, type, limit, page
List your enrollments across all courses, with role (student, observer…), section and current grade summary. Read-only. Use list_courses for course details; use this when you need roles, sections or per-enrollment grades.
get_activity_stream limit, only_active_courses, page
Get recent activity across all your courses: new announcements, discussion replies, graded submissions and messages, newest first. Read-only. Titles and messages are fenced as untrusted text. For counts only, use get_activity_stream_summary; for one course, use get_course_activity_stream.
get_activity_stream_summary
Get counts of unread activity by type (announcements, discussions, messages, submissions) across your courses. Read-only and very cheap. Call it before get_activity_stream to see whether the full stream is worth pulling.
list_todo limit, page
List Canvas's own to-do items for you: assignments waiting for your submission, and items to grade if you are an instructor. Read-only. For a date-bounded view use list_upcoming_assignments; for one course use list_todo_for_course.
get_todo_count
Get the number of items on your Canvas to-do list without fetching them. Read-only and cheap. Use list_todo to see the items.
list_upcoming_events
List your upcoming calendar events and assignment due dates, using Canvas's own default window. Read-only. For a specific date range, use list_calendar_events.
get_dashboard_cards
Get the course cards on your Canvas dashboard, in dashboard order, with names, colors and links. Read-only. Use list_courses for every enrollment, including ones not on the dashboard.
list_favorite_courses limit, page
List the courses you have starred as favorites; these decide what appears on your dashboard. Read-only. Change them with add_favorite_course and remove_favorite_course.
add_favorite_course course_id
Star a course as a favorite so it shows on your Canvas dashboard. Only affects your own view. Reverse with remove_favorite_course.
remove_favorite_course course_id
Unstar a favorite course so it no longer shows on your Canvas dashboard. Only affects your own view; your enrollment is unchanged. Reverse with add_favorite_course.
get_communication_channels limit, page
List the notification channels on your account (email addresses, SMS numbers, push) with their IDs and status. Read-only. Use a channel_id from here with get_notification_preferences.
get_notification_preferences channel_id
Get how often Canvas notifies you about each event type (due dates, grades, announcements…) on one channel: immediately, daily, weekly or never. Read-only. Get channel_id from get_communication_channels first.
get_my_page_views start_time, end_time, limit, page
List your own Canvas page views (URL, time and course) in a time range. Read-only. Useful for showing you opened material on a given date. How far back history goes depends on your school.
list_content_shares limit, page
List course content (assignments, pages, quizzes) that other Canvas users shared directly with you, with sender and share date. Read-only. Returns an empty list if nothing was shared.
get_custom_data namespace, scope
Read key-value data you previously stored on your Canvas account with set_custom_data. Read-only. Returns an error if nothing is stored at that namespace and scope.
set_custom_data data, namespace, scope
Store your own key-value data on your Canvas account (a small private per-user store, invisible to others). Overwrites any existing value at the same namespace and scope. Read it back with get_custom_data.
list_bookmarks limit, page
List your saved Canvas bookmarks with their names, URLs and IDs. Read-only. Use the IDs with delete_bookmark.
create_bookmark name, url, position
Save a Canvas bookmark to a course page or any Canvas URL. Only you see it. Returns the new bookmark with its ID. Use list_bookmarks to see existing ones.
delete_bookmark bookmark_id, confirm, confirm_token
Delete one of your saved Canvas bookmarks. Only affects you. Get bookmark_id from list_bookmarks. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
list_my_observees limit, page
List the students you are linked to as an observer, for parent or mentor accounts. Read-only. Returns an empty list for regular student accounts.
list_notification_categories channel_id
The notification categories on one delivery channel (email, phone) and how often Canvas currently notifies you about each, e.g. due dates, grading, announcements. Use with update_notification_preference.
update_notification_preference channel_id, category, frequency, confirm, confirm_token
Change how often Canvas emails or texts you about one kind of event, e.g. "grading" only weekly, or "announcement" immediately. Only affects your own notifications. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
list_recent_history course_id, limit
List the Canvas pages you opened lately, newest first: the page name, what kind of page it is, the course, a link, when, and about how many minutes you spent. Read-only. Use it for "where was I?" or to reopen something. Page names are fenced as untrusted.
list_courses include_concluded, include_grades, limit, page
List the courses you are enrolled in with IDs, names, codes, term and your current grade. Read-only. Only active courses unless include_concluded is set. Start here to get course_id values for other tools.
get_course course_id
Get full details for one course: name, code, term, start and end dates, syllabus and public description. Read-only. Use list_courses to find course IDs; use get_syllabus for the syllabus as plain text.
get_syllabus course_id
Get a course syllabus as plain text, converted from Canvas HTML. Read-only. The text is fenced as untrusted. If the instructor uploaded the syllabus as a file instead, look in list_course_files; syllabus_digest pulls out dates and weights.
get_course_settings course_id
Get course-level settings such as whether final grades are hidden, the late policy is shown, or a grading standard is used. Read-only. Some settings may be hidden from students, in which case Canvas returns an error.
list_course_tabs course_id
List the navigation tabs visible to you in a course (Home, Assignments, Files, Quizzes…). Read-only. Check this first to see whether a feature such as Files or Pages is enabled before calling its tools.
get_course_activity_stream course_id, limit, page
Get recent activity in one course: announcements, discussion replies, grade changes and messages. Read-only. Titles and messages are fenced as untrusted. For all courses at once, use get_activity_stream.
list_sections course_id, limit, page
List the sections in a course (e.g. lecture or lab sections), including the one you are enrolled in. Read-only. Useful for understanding section-specific due-date overrides.
list_course_users course_id, enrollment_type, search_term, limit, page
List people in a course with names, roles and user IDs, optionally filtered by role or name. Read-only. Your school's privacy settings often limit or block this for students.
get_user_in_course course_id, user_id
Get one person's profile within a course: name, role, section and avatar. Read-only. Get user_id from list_course_users. Your institution's privacy settings may limit what is returned.
get_course_permissions course_id
Show what your token is allowed to do in a course, such as posting to discussions or sending messages. Read-only. Call it before a write tool to avoid an action failing halfway.
list_course_nicknames limit, page
List the personal nicknames you have given courses. Read-only. Only you see nicknames. Change them with set_course_nickname or remove_course_nickname.
set_course_nickname course_id, nickname
Give a course a personal nickname that replaces its name in your own Canvas view. Only you see it; the course is unchanged for everyone else. Undo with remove_course_nickname.
remove_course_nickname course_id
Remove your personal nickname for a course so Canvas shows its official name again. Only affects your own view.
get_course_progress course_id
Get your module completion progress in a course: requirements met, total requirements and next item. Read-only. Returns an error for courses without module completion requirements.
list_todo_for_course course_id, limit, page
List Canvas to-do items for a single course. Read-only. Use list_todo for all courses at once.
list_blackout_dates course_id
List no-work days (blackout dates) in a course used by course pacing. Read-only. Returns an empty list when pacing is not used.
course_contacts course_id
Who to contact in a course and when: the teachers and TAs (with the user IDs send_message needs), office hours found in the syllabus, and office-hour or advising sign-up slots. Read-only.
list_assignments course_id, bucket, search_term, limit, page
List assignments in a course with due dates, points and your submission status, optionally filtered by bucket (e.g. upcoming, overdue) or name. Read-only. Use get_assignment for one assignment's full instructions and rubric.
get_assignment course_id, assignment_id
Get full details for one assignment: instructions, due/lock dates, points, submission types and the rubric. Read-only. Prompt text written by the instructor is fenced as untrusted. Get assignment_id from list_assignments.
list_assignment_groups course_id, include_assignments, limit, page
List a course's assignment groups (e.g. Homework, Exams) with their grade weights and drop rules, optionally with each group's assignments. Read-only. Explains how your final grade is weighted; get_course_grade_breakdown does the math for you.
get_assignment_group course_id, group_id
Get one assignment group (e.g. "Homework") with its weight, drop rules and assignments. Read-only. Use list_assignment_groups to see all groups and their IDs.
list_assignment_overrides course_id, assignment_id, limit, page
List due-date overrides on an assignment: different dates or extensions for sections, groups or individual students. Read-only. Use get_my_override for the dates that apply to you.
get_my_override course_id, assignment_id
Get the due, lock and unlock dates that actually apply to you for an assignment, after section or individual overrides. Read-only. Use this instead of the default dates when deadlines differ by section.
get_assignment_dates course_id, limit, page
List due, lock and unlock dates for every assignment in a course, sorted by due date, in a compact form. Read-only. Use list_assignments when you also need submission status.
get_score_statistics course_id, assignment_id
Get class statistics for an assignment (mean, min, max, quartiles) next to your own score. Read-only. Canvas only shows these once enough students are graded and if the instructor allows it.
get_late_policy course_id
Get a course's late policy: the percentage deducted per late interval, the lowest score a late penalty can reach, and the grade given for missing work. Read-only. Returns an error if the course has no late policy.
list_missing_submissions limit
List every assignment Canvas has flagged as missing across all your courses, with due date, points and how overdue it is. Read-only. One call instead of looping over courses. list_overdue_assignments checks submission status course by course instead.
list_upcoming_assignments days, include_completed
List assignments and other planner items due in the next N days (default 7) across all active courses, soonest first. Read-only. Uses the same Planner feed as the Canvas dashboard; set include_completed to also show items already done.
list_overdue_assignments limit
List assignments past their due date that you have not submitted, checking each active course. Read-only. Slower than list_missing_submissions, which relies on Canvas's own missing flag, but catches items without that flag.
assignment_brief course_id, assignment_id
Everything needed to start an assignment, in one call: the instructions as clean text, due and lock dates, how to submit, attempts, the rubric, the late policy, linked files, group and peer-review details, and your current status.
get_my_submission course_id, assignment_id
Get your submission for one assignment: score, grade, submitted time, lateness and deductions, attachments and instructor comments. Read-only. Use get_submission_history for earlier attempts.
list_my_submissions course_id, limit, page
List all of your submissions in a course with scores, grades and status. Read-only. Use get_my_submission for full detail on one.
get_submission_summary course_id, assignment_id
Get counts of graded, ungraded and not-submitted submissions for an assignment. Read-only. Often instructor-only, so students may get a permission error.
get_submission_history course_id, assignment_id
Get every past attempt of your submission for one assignment, oldest to newest, with scores and timestamps. Read-only. Use get_my_submission for just the latest attempt.
list_submission_attachments course_id, assignment_id
List files attached to your submission for one assignment, with names, sizes and download URLs. Read-only. Pass a URL from here to download_submission_attachment to save a file.
get_originality_report course_id, assignment_id
Get the plagiarism or originality score (e.g. Turnitin) for your submission and its attachments. Read-only. Returns no report if no originality tool is enabled on the assignment.
get_rubric_assessment course_id, assignment_id
Get the rubric scoring applied to your submission, criterion by criterion, with points and comments. Read-only. Use get_rubric to see the full rubric before you submit.
list_submission_comments course_id, assignment_id
List comments on your submission from your instructor and others, with author and time. Read-only. Comment text is fenced as untrusted. Reply with post_submission_comment.
recent_feedback days, course_id
Get the grades and teacher feedback from the last few days across all your courses in one call: score, late or missing, the teacher's comments and rubric notes. Read-only. Use it for "what did my teachers say lately?" Comment text is fenced as untrusted. For one assignment, use get_my_submission.
mark_submission_read course_id, assignment_id
Mark your submission, including any new grade or comments, as read so the unread badge clears. Only affects you.
submit_assignment_text course_id, assignment_id, body, comment, confirm, confirm_token
Submit text for an online text-entry assignment, exactly as given; the tool never writes content for you. Your instructor sees it and it counts as a submission attempt. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
submit_assignment_url course_id, assignment_id, url, comment, confirm, confirm_token
Submit a website URL for an assignment that accepts URL submissions. Your instructor sees it and it counts as a submission attempt. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
submit_assignment_file course_id, assignment_id, file_path, comment, confirm, confirm_token
Upload a local file and submit it to an assignment in one step. Your instructor sees it and it counts as a submission attempt. To upload now and submit later, use upload_submission_file. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
upload_submission_file course_id, assignment_id, file_path, confirm, confirm_token
Upload a local file into an assignment's submission slot without submitting it. Nothing is submitted and your instructor sees nothing yet. Returns a file_id that can be submitted later through raw_canvas_request; submit_assignment_file uploads and submits in one step. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
post_submission_comment course_id, assignment_id, comment, file_ids, confirm, confirm_token
Post a comment on your own submission for an assignment, optionally with files attached. Your instructor sees it. To attach a file, upload it first with upload_comment_attachment. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
upload_comment_attachment course_id, assignment_id, file_path, confirm, confirm_token
Upload a local file so it can be attached to a comment on your submission. Returns a file ID; nothing is visible to anyone until you call post_submission_comment with that ID in file_ids. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
download_submission_attachment url, filename
Download one file attached to your submission and save it to local disk. Returns the saved path. Get the URL from list_submission_attachments.
submit_annotation_assignment course_id, assignment_id, comment, confirm, confirm_token
Hand in a student-annotation assignment (where you mark up a document inside Canvas). Do the annotating in Canvas first; this submits what is there. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
get_all_grades
Get your current and final grades for every active course in one call, including unposted grades where Canvas shows them. Read-only. Use get_course_grade_breakdown to see how one course's grade is calculated.
calculate_gpa credits, default_credits, what_if, extra_points, use_final_score
Calculate your GPA on a 4.0 scale from your current Canvas grades, weighted by credit hours. Read-only. Uses the letter grade Canvas shows, or converts the percent (93+ A, 90 A-, 87 B+ and so on). Supports what-if grades and extra points for honors or AP classes. Pass-fail courses are listed as excluded.
get_course_grade_breakdown course_id
Break down your grade in one course: each assignment group's weight, your points earned vs possible, and its weighted contribution to the total. Read-only. Use compute_needed_score to plan toward a target grade.
what_if_grade submission_id, score
Enter a hypothetical score on one assignment and get your recalculated course grade, with Canvas applying group weights and drop rules. Writes a what-if score only you can see; it is not a real grade. Undo with reset_what_if_grades. Canvas treats this as expensive; for pure math with no writes, use compute_needed_score.
reset_what_if_grades course_id
Clear every what-if score you entered in a course so Canvas shows your real grades again. Only affects your own view.
get_grading_standard course_id, limit, page
Get the letter-grade scale for a course, i.e. the percentage needed for each letter such as A- or B+. Read-only.
list_grading_periods course_id
List a course's grading periods (e.g. quarters) with start, end and close dates. Read-only. Returns an empty list if the course does not use grading periods.
get_my_assignment_analytics course_id
Get your score on each assignment next to the class median, min and max, plus whether you submitted on time. Read-only. Returns an error if course analytics are disabled at your school.
get_my_activity_analytics course_id
Get your page views and participations in a course, counted per day. Read-only. Returns an error if course analytics are disabled at your school.
get_my_communication_analytics course_id
Get daily counts of messages between you and the instructor in a course. Read-only. Returns an error if course analytics are disabled at your school.
get_unposted_grades course_id, limit, page
Get scores your instructor entered but has not released yet, where your enrollment can see them. Read-only. Usually empty for students; use get_all_grades for released grades.
compute_needed_score course_id, target_percent
Calculate the average you need on remaining ungraded work in a course to reach a target final percentage, accounting for group weights. Pure math with no writes. Use what_if_grade to test one specific score with Canvas itself.
grade_impact_ranking course_id
Rank a course's ungraded and upcoming assignments by how much each point moves your final grade. Read-only. Shows where effort pays most; study_priority_ranking does this across all courses with urgency added.
get_grade_trend course_id
List graded assignments in a course in date order with a running average, so you can see whether your grade is rising or falling. Read-only.
final_grade_scenarios course_id, targets
What-if planning for a whole course: your projected final grade if you average 100, 90, 80, 70 or 60% on everything not graded yet, and the average you need on the rest for each letter grade. Uses the course's assignment-group weights and its own letter cutoffs when Canvas shares them. Read-only.
list_quizzes course_id, search_term, limit, page
List Classic Quizzes in a course with due dates, time limits, allowed attempts and points. Read-only. For New Quizzes, use list_new_quizzes. This server never takes quizzes.
get_quiz course_id, quiz_id
Get one Classic Quiz: instructions, time limit, allowed attempts, dates and when results are shown. Read-only. Instructions are fenced as untrusted. This server never takes quizzes.
get_my_quiz_submission course_id, quiz_id
Get your latest submission for a quiz: score, attempt number, state and timing. Read-only. Use list_my_quiz_submissions for every attempt.
list_my_quiz_submissions course_id, quiz_id
List all your attempts on a quiz with the score for each. Read-only. Use get_my_quiz_submission for just the latest.
get_quiz_submission_time course_id, quiz_id, submission_id
Get the time remaining and end time for an in-progress timed quiz attempt. Read-only. Needs the submission ID from get_my_quiz_submission.
list_quiz_questions course_id, quiz_id, quiz_submission_id, limit, page
List a quiz's questions so you can review a completed, graded attempt. Read-only and never used to take a quiz. Canvas hides questions unless the instructor allows review, so this often returns a permission error or nothing.
get_quiz_extensions course_id, quiz_id
Get extra time or extra attempts granted to you on a quiz (accommodations). Read-only. Returns an empty list if none were granted.
get_quiz_ip_filters course_id, quiz_id
Get IP address restrictions on a quiz (used for lab-only or proctored exams), so you know where you can take it. Read-only.
get_quiz_assignment_overrides course_id, quiz_assignment_overrides
Get section- or student-specific due dates for quizzes in a course. Read-only. Use get_my_override for the dates that apply to you on one assignment.
list_new_quizzes course_id, limit, page
List New Quizzes assessments in a course with due dates, points and question counts. Read-only. New Quizzes is a separate service from Classic Quizzes (list_quizzes) and may not be enabled at your school.
get_new_quiz course_id, quiz_id
Get details for one New Quizzes assessment: title, instructions, points and timing. Read-only. Uses the Quiz LTI API, which some schools do not expose to students. For Classic Quizzes use get_quiz.
get_new_quiz_items course_id, quiz_id, limit, page
List the questions in a New Quizzes assessment. Read-only. Most schools only allow this for instructors, so students usually get a permission error.
list_topics course_id, only_announcements, search_term, limit, page
List discussion topics in a course with unread counts and whether you must post before seeing replies. Read-only. Set only_announcements for announcements; read a thread with get_full_topic_view.
get_topic course_id, topic_id
Get one discussion topic: its prompt, author, posting rules and unread count, without the replies. Read-only. The prompt is fenced as untrusted text. Use get_full_topic_view to read the whole thread, or list_topics to find topic IDs.
get_full_topic_view course_id, topic_id, max_entries
Get an entire discussion thread, all entries and nested replies, in one request. Read-only. Much lighter on rate limits than paging through list_entries. All participant text is fenced as untrusted.
list_entries course_id, topic_id, limit, page
List top-level entries in a discussion topic, page by page. Read-only. Entry text is fenced as untrusted. Prefer get_full_topic_view to read a whole thread at once.
list_entry_replies course_id, topic_id, entry_id, limit, page
List the replies under one discussion entry, oldest first. Read-only. Bodies are fenced as untrusted text. To read a whole thread at once, use get_full_topic_view instead.
post_entry course_id, topic_id, message, confirm, confirm_token
Post a new top-level entry to a course discussion. Visible to the whole class. Use reply_to_entry to answer someone's entry. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
reply_to_entry course_id, topic_id, entry_id, message, confirm, confirm_token
Reply to one discussion entry. Visible to the whole class. Use post_entry for a new top-level post. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
edit_my_entry course_id, topic_id, entry_id, message, confirm, confirm_token
Replace the text of one of your own discussion entries, if the course allows editing. The new text is visible to the whole class. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
delete_my_entry course_id, topic_id, entry_id, confirm, confirm_token
Delete one of your own discussion entries, if the course allows it. Classmates see that an entry was removed. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
rate_entry course_id, topic_id, entry_id, rating, confirm, confirm_token
Like (rating 1) or remove your like (rating 0) on a discussion entry, where the instructor enabled ratings. Others see the like count. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
mark_topic_read course_id, topic_id
Mark a discussion topic as read for you. Only affects your unread counts. Use mark_all_entries_read to also clear every reply.
mark_all_entries_read course_id, topic_id
Mark every entry in a discussion topic as read for you. Only affects your unread counts.
mark_entry_read course_id, topic_id, entry_id
Mark one discussion entry as read for you. Only affects your unread counts.
subscribe_topic course_id, topic_id
Subscribe to a discussion topic so you are notified about new replies. Only affects you. Reverse with unsubscribe_topic.
unsubscribe_topic course_id, topic_id
Stop getting notifications for new replies in a discussion topic. Only affects you; the topic and your posts are unchanged. Reverse with subscribe_topic.
list_announcements course_ids, start_date, end_date, unread_only, limit
List announcements from one or more courses in a date range, newest first, with title, author and body. Read-only. Bodies are fenced as untrusted text. Without dates it covers the last 30 days; without course_ids it covers all active courses.
get_unread_discussion_count course_id, limit, page
Get the unread entry count for each discussion topic in a course. Read-only and cheap. Use get_full_topic_view to read a topic.
list_global_announcements
School-wide announcements: the banners your school shows everyone on the Canvas dashboard (closures, outages, deadlines). Read-only. Messages are provenance-fenced.
dismiss_global_announcement notification_id, account_id
Close a school-wide announcement so it stops showing on your Canvas dashboard. Only affects you.
mark_announcement_read course_id, announcement_id
Mark one course announcement as read, clearing its unread badge.
mark_all_announcements_read course_ids, days
Mark every unread announcement in the last N days as read, across all your courses or the ones you pick. Clears the unread badges in Canvas.
list_conversations scope, filter, limit, page
List your Canvas Inbox conversations, newest first, with subject, participants, last message preview and unread state. Read-only. Use get_conversation for the full thread.
get_conversation conversation_id, mark_as_read
Get the full message thread for one Inbox conversation, with authors and times. Read-only unless mark_as_read is true. Message bodies are fenced as untrusted.
send_message recipients, subject, body, course_id, separate_threads, confirm, confirm_token
Send a new Canvas Inbox message, e.g. to a professor or classmate. Recipients get it immediately. Get recipient IDs from find_recipients; to answer an existing thread, use reply_to_conversation. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
reply_to_conversation conversation_id, body, included_message_ids, confirm, confirm_token
Reply within an existing Canvas Inbox conversation. Every participant receives it. Use send_message to start a new thread. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
find_recipients search, course_id, limit
Search by name for people you are allowed to message, optionally within one course. Read-only. Returns the user IDs that send_message and add_recipients need.
add_recipients conversation_id, recipients, confirm, confirm_token
Add more people to an existing Inbox conversation so they receive its messages. Get user IDs from find_recipients. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
mark_conversation_read conversation_id
Mark one Inbox conversation as read. Only affects you; the sender is not notified. Reverse with mark_conversation_unread.
mark_conversation_unread conversation_id
Mark one Inbox conversation as unread so it shows up again. Only affects you. Reverse with mark_conversation_read.
star_conversation conversation_id
Star an Inbox conversation so it appears under the "starred" scope. Only affects you. Reverse with unstar_conversation.
unstar_conversation conversation_id
Remove the star from an Inbox conversation. Only affects you; the conversation itself is unchanged. Reverse with star_conversation.
archive_conversation conversation_id
Archive an Inbox conversation so it leaves your inbox view; it stays under the archived scope. Only affects you.
delete_conversation conversation_id, confirm, confirm_token
Delete an Inbox conversation from your own inbox. Other participants keep their copy. Cannot be undone. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
get_unread_conversation_count
Get the number of unread Canvas Inbox conversations. Read-only and very cheap. Use list_conversations with scope unread to see them.
batch_update_conversations conversation_ids, event, confirm, confirm_token
Apply one action (mark read or unread, star, unstar, archive or delete) to many Inbox conversations at once. Only affects your own inbox. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
list_calendar_events start_date, end_date, type, course_ids, limit, page
List calendar events, or assignment due dates with type=assignment, in a date range (default: the next 14 days). Read-only. Filter to specific courses with course_ids.
get_calendar_event event_id
Get one calendar event: title, start and end time, location, description and the course it belongs to. Read-only. Get event_id from list_calendar_events.
create_personal_event title, start_at, end_at, description, location_name
Create an event on your own Canvas calendar (only you see it). Returns the new event with its ID. Use update_calendar_event to change it later.
update_calendar_event event_id, title, start_at, end_at, description, confirm, confirm_token
Change the title, times or description of a calendar event you created. Only events you own can be changed; course events return a permission error. Fields you omit stay the same. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
delete_calendar_event event_id, confirm, confirm_token
Delete a calendar event you own, such as a personal event. Cannot be undone. Course events return a permission error. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
list_appointment_groups scope, include_past, limit, page
List appointment groups you can sign up for, such as office hours or advising slots, with open time slots. Read-only. Book a slot with reserve_appointment_slot.
get_appointment_group group_id
Get one appointment group (office hours or advising) with its time slots and remaining capacity. Read-only. Book a slot with reserve_appointment_slot using a slot ID from here.
reserve_appointment_slot appointment_id, comments, confirm, confirm_token
Book an office hours or advising time slot. The instructor sees the booking. Get slot IDs from get_appointment_group; cancel with cancel_reservation. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
cancel_reservation event_id, cancel_reason, confirm, confirm_token
Cancel an appointment slot you booked. The instructor can see the cancellation. Get event_id from list_my_reservations. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
list_my_reservations limit, page
List the appointment slots you have booked, from the past week through the next 60 days. Read-only. Cancel one with cancel_reservation.
get_course_pace course_id
Get the pacing plan for a self-paced course: suggested days for each module and the resulting dates. Read-only. Returns an error if course pacing is not used.
list_course_files course_id, search_term, content_types, limit, page
List files in a course (slides, readings, handouts) with names, sizes, types and IDs, optionally filtered by name or type. Read-only. Save one with download_file, or all with download_all_course_files.
list_folders course_id, limit, page
List every folder in a course's Files area with its path, file count and ID. Read-only. Use get_folder_tree for a readable outline of folders and files together.
get_folder folder_id
Get one folder's details: full path, parent folder, and how many files and subfolders it holds. Read-only. Get folder_id from list_folders.
get_folder_tree course_id, max_depth
Show a course's folders and files as an indented outline. Read-only. A good first look at what material exists; use list_course_files for IDs and details.
get_file_metadata file_id
Get details for one file: name, size, content type, created and updated dates, and download URL. Read-only. Use download_file to save it locally.
get_file_public_url file_id
Get a temporary public download link for a file that works without logging in. Read-only, but anyone with the link can download the file until it expires.
download_file file_id, dest_dir
Download one Canvas file and save it to local disk. Returns the saved path and size. Get file_id from list_course_files or list_my_files.
read_course_file file_id, offset, max_chars
Read the text of a Canvas file so you can summarize it, quiz from it or answer questions about it. Read-only. Works with PDF, Word (.docx), PowerPoint (.pptx, including speaker notes), web pages and plain-text files up to 25 MB. Long files come back in parts: call again with next_offset. Scanned PDFs have no text. Get file_id from list_course_files or list_module_items.
list_my_files search_term, limit, page
List files in your personal Canvas storage (not course files), with names, sizes and IDs. Read-only. For course files use list_course_files.
upload_to_my_files file_path, parent_folder_path, confirm, confirm_token
Upload a local file into your personal Canvas storage. Only you can see it until you share or submit it. Returns the new file's ID. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
get_storage_quota
Get your personal Canvas storage quota and how much of it is used. Read-only.
delete_my_file file_id, confirm, confirm_token
Delete a file from your personal Canvas storage. Cannot be undone. Get file_id from list_my_files. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
create_folder name, parent_folder_id
Create a folder in your personal Canvas storage (not in a course). Only you can see it. Returns the new folder with its ID. Upload into it with upload_to_my_files.
list_pages course_id, search_term, limit, page
List the wiki pages in a course with titles, URL slugs and last-updated dates. Read-only. Read one page with get_page_content using its url slug.
get_page_content course_id, page_url
Read a course page as plain text (converted from HTML), with its title and last-updated time. Read-only. The body is fenced as untrusted. Find page slugs with list_pages.
list_page_revisions course_id, page_url, limit, page
List the edit history of one course page: revision numbers, editors and dates. Read-only. Students often cannot see page history, in which case Canvas returns a permission error. Read a revision with get_page_revision.
get_page_revision course_id, page_url, revision_id
Get the content of a course page as it was at one past revision, with the editor and date. Read-only. The body is fenced as untrusted text. Use list_page_revisions to find revision numbers, and get_page_content for the current version. Canvas returns a permission error if page history is hidden from students.
list_modules course_id, limit, page
List the modules in a course in order, with your completion state, prerequisites and unlock dates. Read-only. Use list_module_items to see what is inside a module.
get_module course_id, module_id
Get one module: name, position, unlock date, prerequisites, your completion state and its items. Read-only. Get module_id from list_modules.
list_module_items course_id, module_id, limit, page
List the items in a module (assignments, pages, files, quizzes, links) with each one's completion requirement and whether you met it. Read-only. Use list_modules to find module IDs.
get_module_item course_id, module_id, item_id
Get one item inside a module (assignment, page, file, quiz, link…) with its completion requirement and whether you met it. Read-only. Get item_id from list_module_items.
mark_module_item_done course_id, module_id, item_id
Mark a module item as done to satisfy a 'mark as done' completion requirement. Shows in your instructor's progress view.
mark_module_item_read course_id, module_id, item_id
Mark a module item as viewed to satisfy a 'must view' requirement, without opening it. Shows in your instructor's progress view.
select_mastery_path course_id, module_id, item_id, assignment_set_id, confirm, confirm_token
Choose which branch to follow at a mastery path (conditional release) point in a module. Unlocks that branch's assignments and may not be reversible. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
next_module_items course_id, per_course
Show where you are in each course's modules and the next items you still have to do: what each one needs (open it, turn it in, a minimum score), when it's due, and what is locked and why. Read-only. Use it for "what's next in my classes?" Gives module_id and item_id for mark_module_item_done.
get_module_item_sequence course_id, asset_type, asset_id
Show where a piece of content sits in its module: the previous and next items, so you can work through a module in order. Read-only.
list_media_objects course_id, limit, page
List recorded lectures and other video or audio in a course with titles and media IDs. Read-only. Get captions with get_media_captions or download_media_captions.
get_media_captions media_id
List the caption (subtitle) tracks on a recorded lecture with their languages and IDs. Read-only. Captions are the closest thing to a transcript; save one with download_media_captions.
download_media_captions media_id, track_id, dest_dir
Download a lecture's caption track and save it as a text transcript on local disk. Returns the saved path. Get media_id from list_media_objects and track_id from get_media_captions.
create_content_export course_id, export_type, confirm, confirm_token
Start a course export as a .imscc Common Cartridge or a zip of files. Canvas packages it in the background; poll get_content_export with the returned ID. export_course_archive does export and download in one step. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
get_content_export course_id, export_id
Check a course export's status and get its download URL once Canvas has finished. Read-only. Start an export with create_content_export.
list_external_tools course_id, limit, page
List external (LTI) tools enabled in a course, such as publisher platforms or proctoring apps, with their IDs. Read-only. Open one with get_tool_launch_url.
get_tool_launch_url course_id, tool_id, url
Get a one-time launch URL for an external (LTI) tool in a course, so you can open it directly in a browser. Read-only. Get tool_id from list_external_tools. The URL expires quickly.
list_conferences course_id, limit, page
List web conferences in a course (BigBlueButton or similar) with titles, status and join links. Read-only. Returns an empty list if conferences are not enabled.
list_collaborations course_id, limit, page
List collaborative documents in a course (Google Docs or Microsoft 365 integrations) with titles and links. Read-only.
list_eportfolios include_deleted, limit, page
Your Canvas ePortfolios (showcase sites of your work). Read-only; Canvas does not let other apps add entries, so edit them in Canvas itself.
get_eportfolio_pages eportfolio_id, limit
The pages of one of your ePortfolios, with their text. Read-only.
list_my_groups limit, page
List the student groups you belong to across all courses, with group IDs and course. Read-only. Use the IDs with the other group tools.
get_group group_id
Get one student group: name, description, member count and the course it belongs to. Read-only. Get group_id from list_my_groups.
list_group_members group_id, limit, page
List the members of a student group with names and user IDs. Read-only. Get group_id from list_my_groups.
list_group_discussions group_id, limit, page
List discussion topics inside a group workspace with titles and unread counts. Read-only. Post to one with post_group_discussion.
list_group_files group_id, limit, page
List files shared in a group workspace with names, sizes and IDs. Read-only. Save one with download_file.
list_group_pages group_id, limit, page
List wiki pages in a group workspace with titles and URL slugs. Read-only.
post_group_discussion group_id, topic_id, message, confirm, confirm_token
Post to a discussion inside a group workspace. Visible to your groupmates and instructors. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
list_group_categories course_id, limit, page
List the group sets in a course (e.g. "Project teams") and whether you can sign up yourself. Read-only. Join an open group with join_group.
join_group group_id, confirm, confirm_token
Join a self-signup student group. Groupmates and instructors see that you joined. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
leave_group group_id, confirm, confirm_token
Leave a student group you belong to. You lose access to its workspace. [NEEDS CONFIRMATION: call it once for a preview and a confirm_token, show the preview to the user, and only if they say yes call it again with the same arguments, confirm=true and that confirm_token. Apps that can ask the user directly show a confirmation instead.]
get_group_activity_stream group_id, limit, page
Get recent activity in a group workspace: new discussion posts, files and announcements, newest first. Read-only. Text written by others is fenced as untrusted.
list_rubrics course_id, limit, page
List the rubrics in a course with titles, point totals and IDs. Read-only. Read one in full with get_rubric.
get_rubric course_id, rubric_id
Get a full rubric: every criterion, rating level and point value. Read-only. Read it before starting work to know how it will be scored; get_rubric_assessment shows how your submission was scored.
get_my_rubric_assessment course_id, assignment_id
Get how the rubric was applied to your submission: points and comment for each criterion, plus your score. Read-only. Returns no assessment if the instructor did not grade with a rubric. get_rubric_assessment returns the same data plus the compact rubric_assessment form.

Descriptions are the package's own words, cut at 3,000 characters. Treat them as data.

Install facts

LicenseMIT
Needsnode >=18
Sourcegithub.com/Fireiscoolsolo/canvas-lms-mcp-local
Install scriptsNone declared by it or anything installed with it.
Tarballsha512-htIhDO3NVoBpMPtjBcldFd58CwtQzK0DvCHpwuqRgB/N9KWWH5VtXUKHnKdeQKPWpJVfWcqfW6Qzxjb5jO6McQ==

Versions reported

VersionRunResultTools
1.4.02026-11-16Starts with no setup200
1.3.02026-11-12Starts with no setup200

Check this report yourself

This site did not write the report. A public job on a GitHub-hosted machine did: the run, from this commit of the open-source runner. GitHub signed a token that names that job and the hash of the report, so any edit since would show.

Show it on your README

Bragproof: Starts with no setup

[![Bragproof](https://bragproof.smaverk.com/badge/canvas-lms-mcp-local.svg)](https://bragproof.smaverk.com/r/canvas-lms-mcp-local)

New version out? Ask for a fresh report.