Bragproof

← Reports

bambu-printer-mcp

Starts with no setup1.1.95npm

Installed, started with no arguments, no environment and no input, and listed its tools. Run 2026-11-16.

Needs to start: nothing
Returns a result when called with no setup: 4 of 5 tools tried
Contacts while installing and starting: nothing

73tools listed
0hosts contacted
0files written
0.3 sto start
226dependencies

Its tool definitions changed since version 1.1.93. If you approved the earlier ones, read them again.

What it contacted

Nothing besides the npm registry it was installed from. Watched from outside its sandbox while it was installed and started with no input. Its tools may still contact things when called.

Starting it

npx -y -p bambu-printer-mcp@1.1.95 bambu-printer-mcp

Installing a package runs its code. Use a sandbox for anything you have not read.

Calling its tools

5 tools that take no input and look read-only were called once with nothing. 4 returned a result.

get_printer_statusReturned a result under 0.1 s · 95 characters
get_printer_filamentsReturned a result under 0.1 s · 367 characters
list_printer_filesNo usable answer tool reported an error: Error: connect ECONNREFUSED 127.0.0.1:990 (control socket)
cad_statusReturned a result under 0.1 s · 378 characters
blender_mcp_statusReturned a result under 0.1 s · 101 characters

During the calls it contacted nothing it had not already contacted.

Only tools whose names read like looking something up, with no required input, are tried, five at most. Tools that need input, and anything that sounds like it changes or sends something, are not called.

What its tools tell an agent

In the tool descriptions, nothing that talks about the user, other tools or private files, or uses hidden characters.

2 tools with commands in capitals or very long text
  • Gives the agent orders in slice_stl: using a slicer to generate printable G-code or sliced 3MF. IMPORTANT: bambu_model must be specified to ensure the slicer generates safe G-code for the correct printer.
  • Gives the agent orders in print_3mf: n a Bambu Lab printer. Auto-slices if the 3MF has no gcode. IMPORTANT: bambu_model must be specified to ensure safe printer operation.

Common and usually harmless: it is how many makers stress how a tool should be used.

Found by simple pattern rules in each tool's description (up to 3,000 characters), quoted as written. Parameter descriptions are not scanned. A clean result is not a safety review.

Tools

get_printer_status host, bambu_serial, bambu_token
Get the current status of the Bambu Lab printer
get_printer_filaments host, bambu_serial, bambu_token, bambu_model, nozzle_diameter
Get the live AMS/external filament inventory from the printer over MQTT, including loaded/empty slot summary, resolved slicer profile paths, match confidence, and recommended load_filaments when the printer model is known.
resolve_3mf_ams_slots three_mf_path, plate_index, bambu_model, nozzle_diameter, host, bambu_serial, bambu_token
Inspect a sliced 3MF and match its tray_info_idx filament requirements against the live AMS inventory. Does not upload or start a print.
list_3mf_plates three_mf_path, include_thumbnails
List a Bambu Studio or OrcaSlicer 3MF's plates as its designer laid them out, before slicing: plate_count, and for each plate its index (from 0; slice_stl's slice_plate is index + 1, inspect_print_file's plate_index is index), name, the objects on it, each object copy's identify_id (instances: the ids slice_stl's skip_objects takes) whether the file already holds its G-code (sliced), and filaments: the project filaments that plate prints with and only those (index from 1 = slice_stl's load_filaments/filament_colours position and print_3mf's ams_mapping position + 1; colour, material, filament_id, and the first part using it), from the slice when there is one, otherwise worked out as Bambu Studio does from the plate's parts, painting, support, layer ranges and tool changes. filaments_complete is false when a part's mesh was too large to read its painting: that plate then lists every declared filament, so offer them all rather than miss one that prints. project_filaments lists every filament the project declares, used or not (slice_stl takes one load_filaments profile per declared filament). build_items: the root 3D/3dmodel.model build items on the plate (0-based, build order); parts: each model part of the plate's objects once, with object_id (the mesh object), path when that mesh is in another model part (p:path), build_object_id (the root object a build item places), name, filament (1-based) and painted: true when slicer painting recolours some facets; draw a plate from these with the 3MF's own meshes. A plain 3MF without plate metadata is one plate. include_thumbnails adds each plate's own preview from the file (thumbnail_png_base64). Read-only.
list_3mf_plate_objects three_mf_path, plate_index
List the objects of a sliced 3MF plate that the printer can skip, one per copy, as Bambu Studio's skip dialog lists them: identify_id (id), name, whether it is already skipped, and labelObjectEnabled (the plate was sliced with object labels, which skipping needs). Use these ids with skip_objects during a running print.
68 more tools
extend_stl_base stl_path, extension_height
Extend the base of an STL file by a specified amount
scale_stl stl_path, scale_x, scale_y, scale_z
Scale an STL file by specified factors
rotate_stl stl_path, angle_x, angle_y, angle_z
Rotate an STL file by specified angles (degrees)
get_stl_info stl_path
Get detailed information about an STL file (bounding box, face count, dimensions)
list_templates template_dir
List saved slicing templates from the local template registry directory.
save_template source_path, template_name, template_dir
Copy a 3MF, JSON, or config file into the local template registry and register it under a template name.
get_slice_settings source_path, template_name, template_dir, slicer_profile, template_3mf_path, layer_height, nozzle_diameter, wall_loops, sparse_infill_density, enable_support, support_type, quality, strength
Inspect slicer settings from a saved 3MF template or a JSON/config slicer profile without slicing anything. For a 3MF given as source_path, own_process is true when slice_stl, given this call's other arguments as it would take them (slicer_profile, template_name, template_3mf_path, layer_height, wall_loops, sparse_infill_density, quality, strength), prints the process the file carries (a designer's Bambu Studio or Orca project) unchanged. A 3MF with no slicer settings reports raw_key_count 0; a file that can't be read is an error.
slice_with_template stl_path, template_name, template_dir, bambu_model, slicer_type, slicer_path, slicer_profile, nozzle_diameter, bed_type, nozzle_type, nozzle_volume_type, use_printer_filaments, host, bambu_serial, bambu_token, load_filaments, load_filament_ids, filament_colours, ensure_on_bed, arrange, orient, repetitions, scale, rotate, rotate_x, rotate_y, min_save, skip_modified_gcodes, pause_at_layers, slice_plate
Slice an STL or 3MF using a named template from the local registry. This is a higher-level wrapper around slice_stl for template-based workflows.
slice_stl stl_path, bambu_model, slicer_type, slicer_path, slicer_profile, template_3mf_path, template_name, template_dir, nozzle_diameter, bed_type, nozzle_type, nozzle_volume_type, use_printer_filaments, uptodate, repetitions, orient, arrange, ensure_on_bed, clone_objects, skip_objects, load_filaments, filament_profile, load_filament_ids, filament_colours, enable_timelapse, allow_mix_temp, scale, rotate, rotate_x, rotate_y, min_save, skip_modified_gcodes, pause_at_layers, slice_plate, quality, strength, layer_height, wall_loops, sparse_infill_density, enable_support, support_type, support_threshold_angle
Slice an STL or 3MF file using a slicer to generate printable G-code or sliced 3MF. IMPORTANT: bambu_model must be specified to ensure the slicer generates safe G-code for the correct printer. The text result is the sliced file's path. When Bambu Studio or OrcaSlicer writes a result.json, structuredContent.slicer_result carries it verbatim, success or error: error_string, return_code and each sliced_plates[].warning_message, such as a floating cantilever. structuredContent.slicer_report says whether it failed; for a failure, its message is a plain sentence for a person and slicer_message keeps the slicer's words, which a failed slice's text gives after that sentence. A 3MF that carries its own process settings (a designer's Bambu Studio or Orca project) slices with them unless slicer_profile, template_name or template_3mf_path is given; the machine still comes from bambu_model. quality and strength adjust that process, and strength never lowers its walls or infill.
list_printer_files host, bambu_serial, bambu_token
List files stored on the Bambu Lab printer
bambu_connect_import_file file_path, name, version
Open an existing G-code or sliced 3MF file in the signed-in Bambu Connect app through its official URL scheme. This is a cloud-mode handoff and does not start printing by itself.
bambu_network_bridge_status connect, bridge_command, bambu_network_config_dir, country_code, user_info, timeout_ms
Inspect or probe the FULU OrcaSlicer-bambulab BambuNetwork bridge runtime used for cloud and restored BambuNetwork printing.
bambu_network_call method, payload, with_agent, bridge_command, bambu_network_config_dir, country_code, user_info, timeout_ms
Call a raw FULU OrcaSlicer-bambulab BambuNetwork bridge method, optionally with an initialized network agent injected into the payload.
print_3mf_bambu_network three_mf_path, bambu_model, connection_type, bambu_network_method, dev_id, dev_ip, host, bambu_serial, bambu_token, username, password, bed_type, nozzle_type, nozzle_volume_type, plate_index, project_name, preset_name, task_name, config_filename, bridge_command, bambu_network_config_dir, country_code, user_info, timeout_ms, slicer_type, slicer_path, slicer_profile, nozzle_diameter, nozzle_diameters, use_ams, ams_mapping, ams_slots, ams_mapping_bridge, ams_mapping2, ams_mapping_info, nozzle_mapping, nozzles_info, bed_leveling, flow_calibration, vibration_calibration, layer_inspect, timelapse, use_ssl_for_ftp, use_ssl_for_mqtt, external_change_assist, try_emmc_print, extra_options, client_job_id
Print a 3MF through FULU OrcaSlicer-bambulab's restored BambuNetwork path instead of the MCP LAN MQTT/FTPS path.
camera_stream_start host, bambu_serial, bambu_token, bambu_model, fps, idle_timeout_ms
Start or renew one persistent camera connection for this printer. Call only while watched; it closes automatically after idle_timeout_ms without a viewer request. camera_snapshot then reuses its latest frame. No printer motion or print commands.
camera_frame host, bambu_serial, bambu_token, since_seq, wait_ms, max_width, max_bytes, changed_only, min_change
Read the shared camera stream, optionally waiting up to 10 seconds. Returns JPEG only when newer than since_seq and visibly changed (32×18 grayscale difference). Retain the last delivered frame's seq on unchanged. max_width resizes JPEG to the viewer. Does not start a stopped stream.
camera_stream_stop host, bambu_serial, bambu_token
Close this printer's camera connection and free its cached frames. Other printers keep their own streams. Active viewers may restart it; normally let the idle timeout close a shared stream.
camera_snapshot save_path, timeout_ms, bambu_model, experimental, ffmpeg_path, host, bambu_serial, bambu_token
Capture a single JPEG frame from the printer's chamber camera. A1/P1 use TCP-on-6000; X1/P2S/H2/X2D use RTSP via ffmpeg. Returns JPEG as base64; pass save_path to also write the bytes to disk.
delete_printer_file filename, confirm, host, bambu_serial, bambu_token
Delete a file from the Bambu Lab printer's SD card via FTPS. Destructive: requires confirm:true. Restricted to cache/, timelapse/, and logs/ directories. Path traversal segments (..) are rejected.
upload_gcode filename, gcode, gcode_path, bambu_model, host, bambu_serial, bambu_token
Inspect a G-code file and upload a uniquely named copy without overwriting existing printer files.
upload_file file_path, filename, print, connection_mode, bambu_model, project_name, preset_name, bed_type, plate_index, host, bambu_serial, bambu_token
Upload a local file to the Bambu Lab printer
start_print filename, bambu_model, host, bambu_serial, bambu_token
Start printing a G-code file already on the Bambu Lab printer. Alias of start_print_job for upstream MCP compatibility.
start_print_job filename, bambu_model, host, bambu_serial, bambu_token
Start printing a G-code file already on the Bambu Lab printer
cancel_print host, bambu_serial, bambu_token, connection_mode, connection_type
Cancel the current print job on the Bambu Lab printer
pause_print host, bambu_serial, bambu_token, connection_mode, connection_type
Pause the current print job on the Bambu Lab printer (resumable via resume_print)
resume_print host, bambu_serial, bambu_token, connection_mode, connection_type
Resume a paused job that this server inspected and started. It re-downloads the job's file over FTPS and compares its SHA-256, asks a person to confirm only when the file could not be re-read, and reads the printer again before sending. A job that was cancelled, ended or replaced is never resumed. Returns jobName and bytesVerified.
x2d_native_control message_json, qos, flag, host, bambu_serial, bambu_token
Read calibration results or update X2D AMS metadata/calibration selection through the installed plug-in. Raw motion, heating, task control, and safety-setting changes are rejected.
clear_hms_errors host, bambu_serial, bambu_token
Clear HMS or print error state on the Bambu Lab printer using the clean_print_error MQTT command.
set_print_speed mode, host, bambu_serial, bambu_token
Set the active print speed mode: silent, standard, sport, or ludicrous.
set_airduct_mode mode, host, bambu_serial, bambu_token
Set H2/P2 airduct mode to cooling or heating.
reread_ams_rfid ams_id, slot_id, host, bambu_serial, bambu_token
Trigger a Bambu AMS RFID re-read for one AMS slot. X2D on macOS, or Linux with the native helper installed, uses the native official plug-in route. This can move AMS filament; use only when the printer is idle and unloaded.
set_temperature component, temperature, bambu_model, material, nozzle_diameter, host, bambu_serial, bambu_token
Set a checked bed or nozzle temperature. Positive heating requires matching fresh printer telemetry; nozzle heating also requires declared material. Zero turns the heater off.
set_fan_speed fan, speed, confirm_during_print, host, bambu_serial, bambu_token
Set a Bambu printer fan speed percentage. X2D on macOS, or Linux with the native helper installed, uses Bambu's networking plug-in without UI automation; other models use MQTT.
set_light light, mode, host, bambu_serial, bambu_token
Set a Bambu printer light node mode using the printer's MQTT LED command
skip_objects object_ids, host, bambu_serial, bambu_token
Skip specific object IDs during a running multi-object print using the printer's MQTT skip_objects command
set_ams_drying action, ams_id, host, bambu_serial, bambu_token
Start or stop the AMS filament drying cycle. X2D on macOS, or Linux with the native helper installed, uses the native official plug-in route and supports AMS-HT id 128.
inspect_print_file file_path, bambu_model, plate_index, nozzle_diameters, bed_type, include_preview
Inspect an exact private snapshot of a prepared sliced 3MF or textual G-code file and selected plate without contacting a printer. Returns versioned file-only evidence; no printer readiness or permission to dispatch is established. Does not auto-slice.
print_3mf three_mf_path, pause_at_layers, bambu_model, connection_mode, try_emmc_print, connection_type, bambu_network_method, dev_id, dev_ip, bridge_command, bambu_network_config_dir, country_code, user_info, bed_type, nozzle_type, nozzle_volume_type, host, bambu_serial, bambu_token, plate_index, slicer_type, slicer_path, use_ams, ams_mapping, ams_slots, auto_match_ams, bed_leveling, flow_calibration, vibration_calibration, timelapse, slicer_profile, template_3mf_path, template_name, template_dir, nozzle_diameter, nozzle_diameters
Print a 3MF file on a Bambu Lab printer. Auto-slices if the 3MF has no gcode. IMPORTANT: bambu_model must be specified to ensure safe printer operation.
print_collar_charm source_path, template_name, template_dir, bambu_model, host, bambu_serial, bambu_token, bed_type, bed_leveling, flow_calibration, vibration_calibration, timelapse, slicer_profile, nozzle_diameter
Print a prepared two-part dog collar charm project using the fixed tray policy: inner/smaller object -> black on AMS 1 slot 1, outer/larger object -> white on AMS 2 slot 1.
merge_vertices stl_path, tolerance
Merge vertices in an STL file closer than the specified tolerance
center_model stl_path
Translate the model so its geometric center is at the origin (0,0,0)
lay_flat stl_path
Rotate the model so a face rests on the bed (Z=0), choosing the orientation with the least part and support volume per mm² of bed contact. A face counts only if nothing hangs below it. Returns the new STL path; structuredContent.laid_flat is false, with the input path, when no orientation qualifies.
design_guidance name
Read one piece of this MCP's design guidance by name: fdm_fit (when a part meets a real object or another part); fdm_flexures (when a part must flex, grip, snap, clip, spring, or hold something by bending); fdm_assembly (when a split, joint, insert or printed thread could improve the result); fdm_multicolor (when several colours or support materials share a print); fdm_after_slice (when a candidate has been sliced, before recommending it); fdm_capability (when a bridge or overhang decides the plan and no measured capability is at hand). The same texts as the prompts of those names, for a worker that has tools but not prompts. Read-only.
cad_status
Read the optional code-CAD runtime's readiness and pinned version. Never installs or downloads anything. When only this MCP's own engine files changed since the runtime was last verified (an update) and the installed runtime still matches the pinned lock exactly, it re-runs setup's confined build, STL and STEP round trip (about 15 to 20 seconds) and reports ready; a changed runtime still needs cad_setup with install: true.
cad_setup install
Check the optional confined build123d runtime. With install: true, use uv to install pinned Python/packages in this MCP's data directory and prove a confined build plus STL/STEP round trip. On macOS, the data directory must be on an internal disk with file ownership enabled; external/network volumes are refused before installation. Native signatures are never modified. Never starts Blender, Fusion or a printer.
cad_run inputs, mode, script, script_path, parameters, output_dir, name, role, final, timeout_ms
Build parametric CAD headlessly in OS confinement. Read cad_design first: declare literal P = {...} and build() returning a build123d Shape. Supply script OR script_path; parameters overrides saved named values in one call before derived dimensions. Calls wait for the environment’s exclusive execution slot up to their own deadline and report queue_wait_ms. Each call creates a private immutable subfolder under allowed output_dir, never overwriting previous artifacts. The saved .py and .parameters.json are the recovery checkpoint even after cancellation. Returns independently measured geometry, STL/STEP, six orthographic renders, a perspective view and a contact sheet (with next: read the perspective view before the next change), the closest approach between every pair of solids (bodies), problems, what was checked and not checked, printed: whatever the script wrote with print(), capped at 4000 characters, so a design can report a number it computed, and, in solid mode, purpose and ready: the script's PURPOSE compiled into requirements and evaluated on its use() assembly (held objects, mounts, loads computed from the geometry, facing the user). valid means only that the exported geometry is sound; final: true is recorded only when the design is ready (final_refused says why not).
cad_examples name
The code engine's cookbook: worked build123d designs from simple to complex, each modelled on the best bought version of the thing, with its concept, published sizes and script. Without arguments, lists them by purpose (name, title, use_for: the requests it suits, the pattern it shows, the product it is modelled on): choose by use_for before choosing a mechanism. With name, returns that example's record and full script to adapt. Read-only; starts no process.
cad_check_fit model, reference, transform, clearance_mm, timeout_ms
Check two allowed watertight manifold STL meshes in millimetres. Applies only the explicit rigid transform to reference: XYZ rotation in degrees about the origin, then translation. Never silently scales a scan. Reports Boolean interference volume and minimum surface gap (zero on contact/intersection), plus a clearance verdict; intentional support contact also has zero gap. Like cad_run, a call waits for the environment's exclusive execution slot up to its timeout_ms and reports queue_wait_ms, so several checks may be sent at once. Fails rather than guessing for open meshes or excessive triangle workload.
blender_mcp_status connect, timeout_ms
Inspect Blender MCP configuration or connect and discover the remote server's tools and schemas. Connecting does not edit the scene; use get_scene_info through blender_mcp_call to check the Blender addon.
blender_mcp_call tool_name, arguments, timeout_ms
Call a discovered tool on the configured Blender MCP server, preserving its full MCP content and errors. Discover tool schemas with blender_mcp_status first; execute_blender_code accepts Python code and user_prompt. Calls can modify the active Blender scene and are never automatically retried.
blender_mcp_edit_model stl_path, operations, output_path, user_prompt, timeout_ms, bridge_command, execute
Import, edit, and export a local STL through standard Blender MCP with verified output and existing scene objects preserved. Requires a shared local filesystem and Blender Object Mode. Also supports a separately configured legacy executable bridge.
counterpart_printer_info bambu_model, host, bambu_serial, bambu_token
Counterpart contract (counterpart/1): this server's name and version, the configured Bambu printer, and which progress, layer, camera, filament, pause/resume/cancel and print features it has. Sends nothing to the printer.
counterpart_self_check
Counterpart contract (counterpart/1): whether this install's own runtime dependencies and its bundled bambu-node patch loaded, each with its installed version. Run it after an update; ok is false when a check failed, with a message saying which. Sends nothing to the printer.
counterpart_diagnostics printer, max_bytes
Counterpart contract (counterpart/1): this server's own diagnostics for a bug report, as files for the client to add to its export: the configured printers (model, serial, connection; firmware is not read), this server's settings, slicer path and version, CAD runtime status, recent tool errors, this run's stderr log (MQTT and connection messages). The Bambu network plug-in logs are not included. Redaction fails closed: configured secrets go in their encoded forms, JSON is redacted by key, and any log line that names a secret is withheld whole; serial numbers, error codes and whether a secret is set stay. Names, contents and notes stay within max_bytes; anything missing is listed in notes. Sends nothing to the printer.
counterpart_discover_printers duration_ms
Counterpart contract (counterpart/1): Bambu printers on the local network, from their own SSDP announcements (UDP 2021), with serial, model (as bambu_model names it), name and firmware. Listens for duration_ms (default 4000). network is "unavailable" when another app holds the port. Never connects to or authenticates with a printer.
counterpart_setup_fields serial
Counterpart contract (counterpart/1): the printers this server drives and the settings it reads for each, by .env variable name (first canonical, then aliases): label, hint, whether required, the model choices and the model each serial-number prefix names, and whether camera_snapshot reads the printer's camera with only those settings (cameraSnapshot). Pass serial to get the model it names. Sends nothing to a printer and returns no configured values.
counterpart_propose_filaments filaments, painted, chosen, sliced, bambu_model, nozzle_diameter, host, bambu_serial, bambu_token
Counterpart contract (counterpart/1): which loaded AMS spool prints each of a model's colours, before slicing. Reads the live AMS once. trays lists the spools a person may choose (label like "A2", a person-readable name, colour, material, feed). proposal gives each filament its nearest spool in OKLab colour with the asked-for material preferred, and a verdict: same-colour, closest (that colour isn't loaded; note says so), no-colour or none. One print feeds from one source. Pass chosen to check the person's spools against what is loaded now; mapping then lists every filament slot's spool (painted slots included), and problems says why a choice can't print.
counterpart_print_route route
Counterpart contract (counterpart/1): how this server reaches the printer for prints and for Stop/Pause/Resume. route is "lan" (the local network through FULU's BambuNetwork bridge, or the configured X2D native or Bambu Connect mode), "cloud" (Bambu Cloud through FULU's bridge) or "developer" (the local network straight to a printer in LAN Only + Developer Mode, whose Pause, Resume and Stop need no Bambu app). options lists each with its label, whether it can be chosen here (and why not) and what controls do on it; choices lists the ids that can be chosen. mode and type are BAMBU_DEFAULT_CONNECTION_MODE and BAMBU_DEFAULT_CONNECTION_TYPE as resolved. Pass route to change it: the change applies to the next print and control at once, and is saved to the .env file in this server's working directory when that file exists (savedTo; null otherwise). Sends nothing to the printer.
counterpart_print_record view, frame_format, frame_ids, list_jobs, job_id, include_frames, measurements, host, bambu_serial
Counterpart contract (counterpart/1): read a bounded persistent per-job flight record from disk, including dispatched SHA-256, selected mapping, timestamped allowlisted printer-report changes, expected sliced layer geometry and sampled camera evidence. Survives restart. No printer connection, polling or controls. Firmware FINISH is separate from physical unknown/consistent/suspect_no_growth/suspect_no_extrusion. Inspect pending visual assessment requests with the client worker; clear empty-footprint observations can flag no extrusion without an empty-bed reference. Missing history is unavailable, never fetched from the printer.
counterpart_print_assess job_id, artifact_sha256, frame_id, image_sha256, visibility, footprint_visible, deposition, attempted, reference_frame_id, reference_visibility, reference_empty, host, bambu_serial
Counterpart contract (counterpart/1): save a client vision worker observation against an exact saved job/artifact/frame hash. Local evidence only; no camera request, model call or printer controls. Clear visible empty expected footprint after attempted deposition reports suspect_no_extrusion, even without a usable baseline. Dark/occluded/unknown stays unknown; visible material does not verify success. Persists across restart; repeat observations are idempotent.
counterpart_print_progress bambu_model, host, bambu_serial, bambu_token
Counterpart contract (counterpart/1): the printer's state, current job (name, task id, percent, time left, layers, stage words), temperatures, active filament and problems with Bambu's HMS messages and links. Read from the MQTT report this server keeps, so a held session asks the printer nothing; observedAt is when the printer sent it. An unreachable printer reports state offline. Read-only; not a safety check.
counterpart_make_3mf parts, out_path
Counterpart contract (counterpart/1): combine STL parts exported separately (for example each body of a design) into one new 3MF for multi-colour printing. The parts keep their relative positions as one assembly, and each part prints with its filament number (default: part 1 uses filament 1, part 2 filament 2, and so on). Slice it with slice_stl, passing one load_filaments profile per filament number, then print it with print_3mf and ams_mapping or ams_slots. Never overwrites a file.
blender_mcp_setup update
Check or update the MCP for Blender add-on that the configured Blender bridge (BLENDER_MCP_COMMAND uvx, BLENDER_MCP_ARGS naming mcp-for-blender or blender-mcp) needs. Without update: which add-on file Blender loads, its protocol and the protocol the package expects, whether Blender is listening and the running add-on's own handshake. Changes nothing. With update: true, stages the add-on with the package's own installer (mcp-for-blender install-addon) at the inspected version, checks it, keeps the old file as a backup next to it and renames the new one into place. Never starts, stops or edits Blender; a running Blender uses the new add-on once it is re-enabled or restarted. A custom bridge returns supported false.
fusion_mcp_setup install
Check or install what the Fusion bridge needs on macOS: Autodesk Fusion itself (found, never installed), the Fusion360MCP add-in from DMontgomery40/fusion360-mcp-server at 86a3016a5a5b (every file checked against its pinned SHA-256) set to run on startup, a login item that sets FUSION_MCP_PORT for Fusion however it is opened, and this server's FUSION_MCP_* settings. Without install: reports them and changes nothing. With install: true, installs what is missing and adds the missing settings to this server's own .env (after a copy of it), keeping a configured FUSION_MCP_COMMAND and its arguments. Never starts or quits Fusion; check the connection with fusion_mcp_status.
fusion_mcp_status launch, timeout_ms
Check Autodesk Fusion through the configured Fusion MCP server (fusion360-mcp-server, faust-machines or the pinned fork with document binding): whether it is configured, Fusion is running, the Fusion360MCP add-in answers on its port, and the server's tools and schemas. connected is true only when the add-in answers. With launch: true, starts Fusion on macOS when it is not running and waits up to 90 s for the add-in. Configure FUSION_MCP_COMMAND (uvx) and FUSION_MCP_ARGS (["--from","git+https://github.com/DMontgomery40/fusion360-mcp-server@86a3016a5a5b","fusion360-mcp-server","--mode","socket"]), or run fusion_mcp_setup.
fusion_mcp_call document_id, tool_name, arguments, timeout_ms
Call a discovered tool on the configured Fusion MCP server, such as create_sketch, extrude, fillet, create_parameter, set_parameter, check_interference or execute_code, preserving its full MCP content and errors. Discover tool schemas with fusion_mcp_status first. Calls change the open Fusion design and are never automatically retried. Most tools need an open design: call fusion_mcp_new_design first.
fusion_mcp_new_design bind_document, source_f3d, timeout_ms
Open a new parametric design document in Fusion (execute_code with app.documents.add(FusionDesignDocumentType)). The Fusion MCP tools work on the open design, so a design pass calls this first.
fusion_mcp_export document_id, output_dir, name, body_name, timeout_ms
Export the open Fusion design into an existing directory as <name>.stl (export_stl of one body), <name>.f3d (export_f3d) and <name>.parameters.json (its user parameters), and return their absolute paths. The STL is checked as a finite triangle mesh; slice it like any other model. Fusion must run on this computer, and existing files are never overwritten.

Descriptions are the package's own words, cut at 3,000 characters. Treat them as data.

Install facts

LicenseGPL-2.0
Needsnot stated
Sourcegithub.com/DMontgomery40/bambu-printer-mcp
Install scriptsbambu-printer-mcp declare them. This runner does not run them.
Tarballsha512-t8DCb+mP8oi2s7tFl6NHB/mn8idLpGoJIdcXMmRKf3XQlSXZgZtHVa5VUsmBo4JWdP1C+GibjFHokNg4yaMVhg==

Versions reported

VersionRunResultTools
1.1.952026-11-16Starts with no setup73
1.1.932026-11-12Starts with no setup72

Check this report yourself

This site did not write the report. A public job on a GitHub-hosted machine did: the run, from this commit of the open-source runner. GitHub signed a token that names that job and the hash of the report, so any edit since would show.

Show it on your README

Bragproof: Starts with no setup

[![Bragproof](https://bragproof.smaverk.com/badge/bambu-printer-mcp.svg)](https://bragproof.smaverk.com/r/bambu-printer-mcp)

New version out? Ask for a fresh report.