Bragproof

← Reports

@pipeworx/mcp-court-listener

Starts with no setup0.2.1npm

Installed, started with no arguments, no environment and no input, and listed its tools. Run 2026-11-16.

Needs to start: nothing
Returns a result when called with no setup: 0 of 1 tool tried
Contacts while installing and starting: gateway.pipeworx.io

11tools listed
1host contacted
0files written
0.4 sto start
0dependencies

What it contacted

Hosts it looked up or connected to while installing and starting with no input, watched from outside its sandbox. The npm registry is left out. Says nothing about what its tools contact when called.

Starting it

npx -y @pipeworx/mcp-court-listener@0.2.1

Installing a package runs its code. Use a sandbox for anything you have not read.

Calling its tools

1 tool that takes no input and looks read-only was called once with nothing. 0 returned a result.

find_case_patentsNo usable answer tool reported an error: {"error":"tool_error","message":"Pass either \"docket_id\" (from search_dockets) or \"case_name\" (e.g. \"TurboCode LLC v. Quectel Wirel

During the calls it contacted nothing it had not already contacted.

Only tools whose names read like looking something up, with no required input, are tried, five at most. Tools that need input, and anything that sounds like it changes or sends something, are not called.

What its tools tell an agent

In the tool descriptions, nothing that talks about the user, other tools or private files, or uses hidden characters.

Found by simple pattern rules in each tool's description (up to 3,000 characters), quoted as written. Parameter descriptions are not scanned. A clean result is not a safety review.

Tools

search_opinions query, jurisdiction, court, date_after, date_before, limit
Search US court opinions from CourtListener — 8.3 million of them, with no API key and no rate limit. Covers the UNITED STATES SUPREME COURT (SCOTUS), the federal circuit courts of appeals, the federal district courts, and the state courts (71% of the corpus is state case law). THE tool for what a US court HELD, decided or ruled in a NAMED CASE — "What did the Supreme Court hold in Air France v. Saks?", "Miranda v. Arizona", "the Ninth Circuit ruling in ..." — including the treaty and statutory questions such cases turn on (Warsaw Convention, ERISA, the Fourth Amendment). Matches the case name, the judge, and (where CourtListener recorded one) a nature-of-suit/disposition category, so it is strongest on party names, judges, and case categories ("workers compensation", "habeas", "immigration") and weaker on a legal DOCTRINE that would not appear in those fields (e.g. "qualified immunity") — use find_case when you know the party, and expect this to sometimes miss on doctrine-only phrasing. Filter by jurisdiction (state vs federal, inferred from the citation reporter) and by date_filed (the real ruling date). A specific court code (e.g. "scotus", "ca9") or a filing after the covered window falls back to a live, token-less CourtListener search automatically. Every result carries snapshot_date and opinion_ids to read with get_opinion.
court_listener_search_dockets query, court, limit
Search US court dockets by keyword. Covers PACER and RECAP archives. Each result carries docket_id, case name, court, filing and termination dates, docket number, nature of suit, the cause of action, the assigned judge, and the PACER case id.
search_case_law query, limit, include_snippets
Search the FULL TEXT of US court opinions by subject matter — "qualified immunity for police dogs", "securities fraud scienter pleading standard". Searches the full text of CourtListener opinions with no API key and no rate limit, and returns the most relevant opinion ids, a relevance score and how often each case has been cited; set include_snippets for a passage around the match, or call get_opinion to read the whole thing. Use this when you know the TOPIC. To find a case by NAME use find_case; by reporter citation use lookup_citation. Phrase queries need quotes.
find_case name, limit
Find a US court case BY NAME and get its citations, filing date, judges and how often it has been cited. Searches 8.3 million opinions across 3,361 courts — no API key, no rate limit. Ranked by citation count, so the leading case for a name comes first. Use this when you know what the case is CALLED; use search_opinions when you only know the TOPIC.
lookup_citation citation
Resolve a US reporter citation such as "410 U.S. 113" or "347 U.S. 483" to the case it refers to, with name, filing date, judges and citation count. No API key, no rate limit. Use when a brief, opinion or article cites a case by reporter and you need to know which case that is.
6 more tools
list_case_opinions cluster_id
List every opinion filed in one case (cluster) — majority, concurrences and dissents — with the opinion_id needed to read each one via get_opinion. No API key, no rate limit. Use after find_case or lookup_citation to get from a case to its readable text.
get_opinion id
Get the FULL TEXT of a US court opinion by its CourtListener opinion ID (the opinion_id returned by search_opinions). Covers 8.3 million opinions, 71% state case law — no API key needed. Returns the opinion text, the case name, the real filing date, author, citation count, whether the text came from OCR of a scan, and the data as-of date. Opinions filed after that date may fall through to live search.
list_docket_filings docket_id, limit
List the filings on a US FEDERAL district or bankruptcy court docket — every complaint, motion, order and exhibit RECAP has recorded for that case, in filing order, with the document id, entry number, filing date, page count and a link to the PDF. This is the docket sheet: what was filed, when, and by which entry number. Each filing reports whether its PDF is actually held (`pdf_available`); RECAP holds the docket text for far more filings than it holds documents, so treat a filing with no PDF as a real filing whose document nobody has purchased yet, not as a missing record. Takes the docket_id from search_dockets. Court opinions are a different thing and live in search_case_law / get_opinion.
get_docket_filing document_id
Get one filing from a US federal court docket by its document id — the entry description as the clerk wrote it, the filing date, page count, the docket_id it belongs to, a text excerpt where the document has been scanned, and a direct PDF link. Use after list_docket_filings or search_court_filings to read a specific document. Returns pdf_available false when RECAP has the docket entry but not the document itself.
search_court_filings query, court, limit
Search the TEXT of US federal court filings — complaints, motions, briefs, orders and exhibits from PACER as archived in RECAP, roughly 9.7 million documents. Use this to find what was actually argued or ordered in litigation ("trade secret misappropriation", a company named as a defendant, a specific contract term), as opposed to the appellate opinions that search_case_law covers. Returns the filing description as the clerk wrote it, the filing date, a matching text excerpt, a PDF link where the document is held, and the docket_id to read the rest of that case with list_docket_filings. Quote a phrase to search it exactly.
find_case_patents case_name, docket_id, court, filing_limit
Patent litigation cross-reference: a named US district-court case to its docket, its asserted patent NUMBERS, and its defendants. Pass a case name (e.g. "TurboCode LLC v. Quectel Wireless Solutions") or a docket_id already known from search_dockets. Patent numbers come ONLY from text CourtListener/RECAP already indexes — the clerk's own docket-entry descriptions (e.g. an exhibit filed as "United States Patent No. 6,813,742") and the text of any document someone else has already purchased from PACER — never from buying a PACER document. Each patent number says exactly which filing it was found in and the label that preceded it, and carries USPTO patent metadata (title, status, grant date, inventor) when a platform USPTO key is configured — the number is still returned without one. Defendants come from the case caption CourtListener indexed, not an authenticated PACER party list, and say so. This is a thin cross-reference: a patent asserted only inside an unpurchased complaint PDF, or a defendant list CourtListener truncated with "et al.", will not be complete here — the response names that gap rather than hiding it.

Descriptions are the package's own words, cut at 3,000 characters. Treat them as data.

Install facts

LicenseMIT
Needsnode >=18
Sourcegithub.com/pipeworx-io/mcp-court-listener
Install scriptsNone declared by it or anything installed with it.
Tarballsha512-ttDxt4pi3Y7v+IJi/M4wKN4rrTi4Yi1WG89S8+kM+A2ghcrxCt3FdNG2Wui39vaJytoqxQs26QJeS/FENQT6qg==

Check this report yourself

This site did not write the report. A public job on a GitHub-hosted machine did: the run, from this commit of the open-source runner. GitHub signed a token that names that job and the hash of the report, so any edit since would show.

Show it on your README

Bragproof: Starts with no setup

[![Bragproof](https://bragproof.smaverk.com/badge/@pipeworx/mcp-court-listener.svg)](https://bragproof.smaverk.com/r/%40pipeworx/mcp-court-listener)

New version out? Ask for a fresh report.