Bragproof

← Reports

@locker-protocol/agent-wallet-hyperliquid-trader-mcp

Starts with no setup2.5.0npm

Installed, started with no arguments, no environment and no input, and listed its tools. Run 2026-11-16.

Needs to start: nothing
Returns a result when called with no setup: 4 of 5 tools tried
Contacts while installing and starting: nothing

42tools listed
0hosts contacted
3files written
0.6 sto start
196dependencies

What it contacted

Nothing besides the npm registry it was installed from. Watched from outside its sandbox while it was installed and started with no input. Its tools may still contact things when called.

Starting it

npx -y @locker-protocol/agent-wallet-hyperliquid-trader-mcp@2.5.0

Installing a package runs its code. Use a sandbox for anything you have not read.

Calling its tools

5 tools that take no input and look read-only were called once with nothing. 4 returned a result.

paper_statusNo usable answer tool reported an error: { "error": { "code": "PAPER_NOT_INITIALIZED", "message": "There is no simulation account yet.", "hint": "Run `paper_init {
policy_showReturned a result under 0.1 s · 440 characters
mandate_showReturned a result under 0.1 s · 213 characters
statusReturned a result under 0.1 s · 1,547 characters
hyperkeel_statusReturned a result under 0.1 s · 24 characters

During the calls it contacted nothing it had not already contacted.

Only tools whose names read like looking something up, with no required input, are tried, five at most. Tools that need input, and anything that sounds like it changes or sends something, are not called.

What its tools tell an agent

In the tool descriptions, nothing that talks about the user, other tools or private files, or uses hidden characters.

Found by simple pattern rules in each tool's description (up to 3,000 characters), quoted as written. Parameter descriptions are not scanned. A clean result is not a safety review.

Tools

perps_venues
The perps venues this wallet trades on (Hyperliquid).
perps_markets dex, all_dexes, search, limit
Markets by 24 h volume: mark price, 24 h change, funding, open interest, maximum leverage; halted ones marked.
perps_quote symbol, side, size, leverage, type, limit_px, trigger_px, max_slippage_bps, tp, sl, tif, reduce_only, margin
What an order would cost before anything is signed: entry and worst price on the live book, fees as one total, liquidation estimate, Hyperliquid's $10 minimum.
perps_positions dex, all_dexes, address, paper
Open positions (the simulation account's with paper: true, or when simulation mode is on and no address is given).
perps_balance dex, all_dexes, address, paper
Equity and withdrawable margin, per dex (the simulation account's with paper: true).
37 more tools
perps_orders dex, all_dexes, address, paper
Open orders, triggers included (the simulation account's with paper: true: its entry triggers waiting for their price, judged on the mark first, one reached filled and said under fired).
perps_regime symbol
The regime of a market, read on its 1 h, 4 h and 5 m candles: strong bull, weak bull, range, weak bear or strong bear with its trend score, the EMA stack, the structure (higher highs and lows), RSI 14 and 6, ATR and whether volatility expands, volume, and how long the regime has held. It tells a trending market from one in a range.
perps_ranges limit, dex, all_dexes
Which markets are in a range now, over the last 4 hours: range width, volatility, their ratio (ranginess), a score from 0 to 10 (0 outside 0.5 to 5 % wide), support and resistance. The markets whose candles fail are skipped and counted.
perps_open symbol, side, size, leverage, type, limit_px, trigger_px, max_slippage_bps, tp, sl, tif, reduce_only, margin, paper, confirm, quote_id
Open or add to a position. Without confirm, returns the quote, the local policy check and a quote_id, and signs nothing. With confirm: true and that quote_id, the guardian rebuilds the order, checks the policy again and signs it with the agent key.
perps_close symbol, size, all, max_slippage_bps, paper, confirm, quote_id
Close a position (reduce-only, at market), or every one with all: true. Without confirm, returns what would close and a quote_id, and signs nothing. Closing is always allowed by the policy.
perps_cancel symbol, order_id, confirm, quote_id
Cancel an open order. Runs only with confirm: true and the quote_id the same call without confirm returned; without them, signs nothing.
perps_modify symbol, leverage, tp, sl, confirm, quote_id
Change the leverage of a market, or set TP/SL on an open position. Runs only with confirm: true and the quote_id the same call without confirm returned; without them, signs nothing.
perps_deposit amount
Deposit USDC from Arbitrum to Hyperliquid. Signed by the user's own wallet (Locker Vault, their browser extension or their mobile wallet): this tool signs nothing and returns the command the user types in their own terminal.
perps_withdraw amount, destination
Withdraw USDC to Arbitrum. Signed by the user's own wallet (Locker Vault, their browser extension or their mobile wallet): this tool signs nothing and returns the command the user types in their own terminal. The agent key cannot withdraw (Hyperliquid refuses it).
perps_transfer amount, to_dex, from_dex
Move USDC margin between the main dex and a HIP-3 dex of the account. Signed by the user's own wallet (Locker Vault, their browser extension or their mobile wallet): this tool signs nothing and returns the command the user types.
wallet_address
The account the agent trades for, and how it signs: Locker Vault, a browser extension or a mobile wallet.
wallet_balances address
ETH and USDC on Arbitrum, margin and spot on Hyperliquid.
paper_init budget, reset
Open a simulation account: fills on the real order book with the real fees, no key and no vault needed.
paper_status
Equity, positions and fees of the simulation account, at live marks.
paper_on
Every perps tool uses the simulation account until paper_off; a position's take-profit and stop are set and fire there as on Hyperliquid, the leverage is set by the next order, and the movements of funds are refused meanwhile.
paper_off
Back to the real account.
paper_record top, min_vlm, coins
Record the market into a local tape for paper_replay: the 1 m, 5 m, 1 h and 4 h candles of each market and its funding history, appended to what is already recorded. One call reaches about a day back on the 1 m band, so the tape grows by running this again over days. Nothing is signed and no key is read.
paper_replay strategy, from, to, coins
Replay a strategy on the recorded tape and return the report: trades, win rate with its 95 % lower bound, costs, and a verdict. GATE NOT CLEARED is the usual outcome of a short tape, and it means the tape is too short to tell, not that the strategy is bad; run paper_record again over days. A replay never proves that a real order will win: it is what the recorded past would have given, fees and funding counted, and nothing is signed.
policy_show
The limits every order is checked against: size per order, leverage, markets, orders per day, risk:reward, expiry and the bounds set on this computer.
mandate_show
The mandate the user signed, when there is one: the limits the guardian applies before every opening on top of the policy (size, leverage, markets, orders and notional per day, the fee recipient, live copies), its end, and whether it is in force.
mandate_sign max_notional_per_day, actions, days, copy_leaders, copy_budget, copy_only
Sign the limits of the agent with the user's own wallet (Locker Vault, their extension or their mobile wallet): the policy's bounds, a notional ceiling per day, the uses it allows (orders, live copies, the pilot) and the traders live copies may follow, for the agent's life at most (180 days). This tool signs nothing and returns the command the user types in their own terminal.
mandate_revoke
Drop the mandate: the guardian opens nothing under it until the user signs a new one. Closing positions stays allowed. It only restricts.
journal since, limit
What was done, refused, and paid: orders, refusals, deposits, and the fees total.
status
Account, agent, guardian (locked or unlocked) and mode, at a glance.
doctor
Check the setup, sign nothing: each check with what to do.
hyperkeel_status
Whether this computer is connected to hyperkeel.com (market data, alerts), with which account, until when. Connecting is the user's: `lpa hyperkeel login`.
hyperkeel_brief
The state of the market in one answer, from hyperkeel: the movers, funding, liquidations and large trades. No account needed.
hyperkeel_leaders window
The first accounts of a Hyperliquid leaderboard, from hyperkeel: their PnL, volume and ROI over the period. No account needed.
hyperkeel_follows
The traders the user follows on hyperkeel, where their moves are sent, and the latest ones.
hyperkeel_follow address
Follow a trader on hyperkeel: its moves reach the user with their alerts. Moves no funds.
hyperkeel_unfollow address
Stop following a trader on hyperkeel.
hyperkeel_alerts threshold, off
The alerts on the moves of the traders followed (notifications, email): on from 250k, 1m or 5m dollars, or off.
copy_start leader, budget, days, sizing, max_scale, percent, fixed_margin, at_end, live
Start a background process that copies a trader for some days: every order of theirs is mirrored, sized as asked, with the real fees; what the leader reduces is reduced by the same share. In simulation by default, on a simulation account of its own, and nothing is signed. With live, the orders go to the real account through the guardian, each checked against the policy and the mandate the user signed on their phone. The process outlives this call and keeps running after the terminal closes, until copy_stop or the days run out.
copy_stop leader, all
Stop the background process copying a trader, or every one; the result stays in copy_status with all: true.
copy_status all
The copies in simulation: each one's equity and gain, running or (with all) ended.
copy_resume
Start a background process again for each copy left paused (after a restart of the computer).
pilot_status
The pilot that trades on its own in the guardian: running and when it thinks next, paused and why, or ended. Read only: no tool arms, stops or resumes it; the user does, in their terminal.

Descriptions are the package's own words, cut at 3,000 characters. Treat them as data.

Files it wrote

Paths inside its sandbox, where its home folder is /tmp and its own folder cannot be written to.

Install facts

LicenseSEE LICENSE IN LICENSE
Needsnode >=22.13.0
Sourcegithub.com/locker-protocol/agentic
Install scriptssecp256k1 declare them. This runner does not run them.
Tarballsha512-Q/GZ/YlB1VP604qLI6GrbIXNTNY4MXxlZ8XeBn3C60YVL8qV+ELfR0EXKxD+IjXVxLLFzDgdmiFZFYR1X/7wOg==

Check this report yourself

This site did not write the report. A public job on a GitHub-hosted machine did: the run, from this commit of the open-source runner. GitHub signed a token that names that job and the hash of the report, so any edit since would show.

Show it on your README

Bragproof: Starts with no setup

[![Bragproof](https://bragproof.smaverk.com/badge/@locker-protocol/agent-wallet-hyperliquid-trader-mcp.svg)](https://bragproof.smaverk.com/r/%40locker-protocol/agent-wallet-hyperliquid-trader-mcp)

New version out? Ask for a fresh report.