Bragproof

← Reports

@gethopp/figma-mcp-bridge

Starts with no setup0.0.27npm

Installed, started with no arguments, no environment and no input, and listed its tools. Run 2026-11-16.

Needs to start: nothing
Returns a result when called with no setup: 1 of 5 tools tried
Contacts while installing and starting: nothing

56tools listed
0hosts contacted
0files written
0.2 sto start
97dependencies

Its tool definitions changed since version 0.0.26. If you approved the earlier ones, read them again.

What it contacted

Nothing besides the npm registry it was installed from. Watched from outside its sandbox while it was installed and started with no input. Its tools may still contact things when called.

Starting it

npx -y @gethopp/figma-mcp-bridge@0.0.27

Installing a package runs its code. Use a sandbox for anything you have not read.

Calling its tools

5 tools that take no input and look read-only were called once with nothing. 1 returned a result.

list_filesReturned a result under 0.1 s · 2 characters
get_documentNo usable answer tool reported an error: No plugin connected. Open a Figma file and run the bridge plugin.
get_selectionNo usable answer tool reported an error: No plugin connected. Open a Figma file and run the bridge plugin.
get_prototype_connectionsNo usable answer tool reported an error: No plugin connected. Open a Figma file and run the bridge plugin.
get_stylesNo usable answer tool reported an error: No plugin connected. Open a Figma file and run the bridge plugin.

During the calls it contacted nothing it had not already contacted.

Only tools whose names read like looking something up, with no required input, are tried, five at most. Tools that need input, and anything that sounds like it changes or sends something, are not called.

What its tools tell an agent

In the tool descriptions, nothing that talks about the user, other tools or private files, or uses hidden characters.

Found by simple pattern rules in each tool's description (up to 3,000 characters), quoted as written. Parameter descriptions are not scanned. A clean result is not a safety review.

Tools

list_files
List all currently connected Figma/FigJam files. Returns fileKey and fileName for each. Use the fileKey to target a specific file in other tools.
get_document fileKey
Get the current Figma/FigJam page document tree. When multiple files are connected, specify fileKey.
get_selection fileKey
Get the currently selected nodes in Figma/FigJam. When multiple files are connected, specify fileKey.
get_layout_tree rootId, maxNodes, fileKey
Read absolute node transforms and layout bounds for a capture root. Separate screenshot calls are non-atomic.
get_node nodeId, includePrototype, fileKey
Get a specific Figma/FigJam node by ID. Accepts top-level IDs like '4029:12345' and instance-child IDs like 'I12740:17806;12740:17793'. Never use hyphens. Pass includePrototype: true to also get the prototype interactions on the node and its descendants. When multiple files are connected, specify fileKey.
51 more tools
get_prototype_connections nodeId, maxNodes, includeEmpty, fileKey
Read-only. List the prototype interactions on a node and all its descendants, including instance sublayers. Each reaction is Figma's own trigger and actions (navigate/swap/overlay/scroll-to/change-to, back, close, URL, set variable/mode, conditional blocks, media), with each destination resolved to its name, screen, and page, and variables and modes resolved to names. Also returns the page's flow starting points. Not available in FigJam. When multiple files are connected, specify fileKey.
trace_prototype_flow nodeId, maxScreens, maxNodesPerScreen, fileKey
Read-only. Follow prototype navigation breadth-first from a screen: returns the screens reached (with depth and the node that reached them) and every interaction edge with its source node, trigger, action, enclosing conditional branches, and destination screen. Screens reached again are marked as revisits; unresolvable destinations are listed. Not available in FigJam. When multiple files are connected, specify fileKey.
get_styles fileKey
Get all local styles in the document. When multiple files are connected, specify fileKey.
get_metadata fileKey
Get metadata about the current Figma/FigJam document including file name, pages, and current page info. When multiple files are connected, specify fileKey.
get_design_context depth, fileKey
Get the design context for the current selection or page. Returns a summarized tree structure optimized for understanding the current design context. Works in both Figma and FigJam. When multiple files are connected, specify fileKey.
get_variable_defs fileKey
Get all local variable definitions including variable collections, modes, and variable values. Variables are Figma's system for design tokens (colors, numbers, strings, booleans). When multiple files are connected, specify fileKey.
get_screenshot nodeIds, format, scale, clip, fileKey
Export a screenshot of the selected nodes or specific nodes by ID. Returns base64-encoded image data. Works in both Figma and FigJam. When multiple files are connected, specify fileKey.
set_node_visibility items, fileKey
Show or hide specific Figma nodes. Returns previous visibility for each node so you can restore them after. Useful for isolating a single layer before exporting: hide all siblings, export the frame, then restore visibility.
set_text_content nodeId, text, characters, fileKey
Update the contents of a text node. Works on TEXT nodes plus FigJam STICKY and SHAPE_WITH_TEXT nodes (their text sublayer). The plugin loads the node's fonts before applying the new text. Accepts either text or characters. When multiple files are connected, specify fileKey.
set_text_properties nodeId, fontFamily, fontStyle, fontSize, textAlignHorizontal, textAlignVertical, textAutoResize, lineHeightPx, letterSpacingPx, fillHex, fillOpacity, x, y, width, height, fileKey
Patch common text properties such as font family/style, size, line height, letter spacing, and fill color, plus alignment, auto-resize, and bounds on TEXT nodes. Also targets FigJam STICKY and SHAPE_WITH_TEXT text sublayers (alignment/auto-resize are TEXT-only). When multiple files are connected, specify fileKey.
set_node_properties nodeId, nodeIds, name, x, y, width, height, rotation, opacity, visible, cornerRadius, fileKey
Patch common node properties such as name, position, size, visibility, opacity, and corner radius. Accepts either a single nodeId or a nodeIds array to apply the same changes to multiple nodes in one call. Only supported properties for the target node type may be changed. Use set_solid_fill or set_gradient_fill to change paints. Works in both Figma and FigJam. When multiple files are connected, specify fileKey.
set_node_constraints nodeId, nodeIds, horizontal, vertical, fileKey
Set native Figma horizontal and/or vertical constraints on layers inside frames, components, or instances. Values: MIN, MAX, CENTER, STRETCH, SCALE. Rejects incompatible Auto Layout children (unless absolute positioned) and FigJam nodes. Accepts nodeId or nodeIds, preserves the unspecified axis, and returns previous and applied constraints.
apply_paint_style nodeId, nodeIds, styleId, target, fileKey
Link an existing local Figma Paint Style to fills or strokes, preserving native style association. Supports nodeId or nodeIds; validates compatible nodes and returns verified style IDs with per-node errors for batches. Available in Figma Design, not FigJam or Dev Mode.
set_solid_fill nodeId, hex, fillHex, opacity, fillOpacity, target, fileKey
Replace a node's fill (or stroke) with a single solid paint. Provide a hex color and optional paint opacity — fillHex/fillOpacity are accepted as aliases. Use set_gradient_fill for gradient paints.
set_gradient_fill nodeId, gradientType, gradientStops, gradientTransform, opacity, target, fileKey
Replace a node's fill (or stroke) with a gradient paint. Provide ordered stops (position 0..1, hex color, optional alpha) and an optional 2x3 gradientTransform matching Figma's gradientTransform format. Useful for setting linear/radial/angular/diamond gradients programmatically.
set_effects nodeId, effects, fileKey
Replace a node's effects list (drop/inner shadows, layer/background blurs). Pass an empty array to clear all effects. Each entry mirrors the shape returned by get_node's `effects` field.
set_stroke_properties nodeId, strokeWeight, strokeAlign, dashPattern, strokeCap, strokeJoin, fileKey
Patch stroke geometry properties: weight, align, dash pattern, cap, join. Use set_solid_fill/set_gradient_fill with target='stroke' to set the paint itself.
set_auto_layout nodeId, layoutMode, itemSpacing, counterAxisSpacing, paddingTop, paddingRight, paddingBottom, paddingLeft, primaryAxisAlignItems, counterAxisAlignItems, primaryAxisSizingMode, counterAxisSizingMode, layoutWrap, fileKey
Configure auto-layout on a frame: direction, gap, padding, alignment, sizing modes, wrap. Set layoutMode='NONE' to disable auto-layout on the frame. Not supported on SECTION nodes (Figma's API has no section auto-layout).
create_page name, setAsCurrent, fileKey
Create a new page in the Figma document, optionally naming it and switching the editor to it. Returns the new page's ID, which can be passed as parentId to create_frame / create_text / create_shape / create_image to author content on that page. When multiple files are connected, specify fileKey.
create_frame name, parentId, x, y, width, height, fillHex, fillOpacity, fileKey
Create a new frame, optionally inside a specified parent. You can set name, size, position, and a solid fill. When multiple files are connected, specify fileKey.
create_section name, parentId, x, y, width, height, fillHex, fillOpacity, sectionContentsHidden, fileKey
Create a new section — a named container with its own background, resizable independently of its contents. Works in Figma and FigJam. When multiple files are connected, specify fileKey.
create_text name, parentId, characters, fontFamily, fontStyle, fontSize, textAlignHorizontal, textAutoResize, fillHex, fillOpacity, x, y, width, height, fileKey
Create a new text node, optionally inside a specified parent. You can set its content, font, size, alignment, color, position, and bounds. Works in both Figma and FigJam. When multiple files are connected, specify fileKey.
create_shape shapeType, name, parentId, x, y, width, height, rotation, cornerRadius, fillHex, fillOpacity, strokeHex, strokeOpacity, strokeWeight, fileKey
Create a rectangle, ellipse, or line, optionally inside a specified parent. You can set its size, position, rotation, fill, and stroke. Works in both Figma and FigJam. When multiple files are connected, specify fileKey.
create_shape_with_text shapeType, name, parentId, characters, fontFamily, fontStyle, fontSize, x, y, width, height, rotation, fillHex, fillOpacity, strokeHex, strokeOpacity, strokeWeight, textFillHex, textFillOpacity, fileKey
Create a FigJam shape that carries its own text label (SHAPE_WITH_TEXT), e.g. ROUNDED_RECTANGLE, DIAMOND, or ENG_DATABASE. You can set its shape type, text (and text fill via textFillHex), fill, stroke, position, and size. Only available in FigJam. When multiple files are connected, specify fileKey.
create_image source, name, parentId, x, y, width, height, cornerRadius, scaleMode, fileKey
Create an image-backed rectangle from a local file path, remote URL, or data URI. You can set its parent, position, size, corner radius, and fit mode. Works in both Figma and FigJam. When multiple files are connected, specify fileKey.
create_svg source, name, parentId, x, y, width, height, fileKey
Insert raw SVG markup or a workspace-local SVG file as editable Figma vector layers using figma.createNodeFromSvg. You can set its parent, position, size, and semantic name. When multiple files are connected, specify fileKey.
import_html_layers source, name, parentId, x, y, fileKey
Import a DOM serialization (JSON produced by html-figma's browser htmlToFigma()) as editable Figma layers inside a new wrapper frame — frames, text, rectangles, and SVG vectors in one call. Source must be a JSON file path inside the MCP server working directory. Optionally append the wrapper into an existing frame/section via parentId. Requires the plugin to be open in the design editor. When multiple files are connected, specify fileKey.
create_sticky name, parentId, characters, x, y, isWideWidth, fileKey
Create a new sticky note in FigJam. You can set its text content, position, and whether it uses the wide shape (isWideWidth). Only available in FigJam. When multiple files are connected, specify fileKey.
create_connector name, parentId, startNodeId, endNodeId, startX, startY, endX, endY, startAnchor, endAnchor, strokeWeight, strokeHex, fileKey
Create a connector between two nodes in FigJam. You can specify start/end node IDs or absolute positions, plus the attachment side on each node (startAnchor/endAnchor: top, bottom, left, right, auto). Only available in FigJam. When multiple files are connected, specify fileKey.
duplicate_nodes nodeIds, fileKey
Duplicate one or more nodes in place. The duplicates remain under the same parent as the originals. Works in both Figma and FigJam. When multiple files are connected, specify fileKey.
duplicate_with_offset nodeIds, offsetX, offsetY, fileKey
Duplicate nodes and move each duplicate by a fixed offset in one call. Returns the mapping from source node IDs to duplicate node IDs. Works in both Figma and FigJam. When multiple files are connected, specify fileKey.
fit_to_content nodeId, padding, fileKey
Resize a SECTION so it tightly wraps its children with optional padding: children are shifted so their bounding box starts at the padding, then the section is resized to bbox + 2×padding. SECTION nodes only — Figma's API has no equivalent for other containers. Works in Figma and FigJam. When multiple files are connected, specify fileKey.
distribute_horizontally nodeIds, fileKey
Space three or more nodes with equal horizontal gaps, keeping the leftmost and rightmost nodes fixed. Works in both Figma and FigJam. When multiple files are connected, specify fileKey.
distribute_vertically nodeIds, fileKey
Space three or more nodes with equal vertical gaps, keeping the topmost and bottommost nodes fixed. Works in both Figma and FigJam. When multiple files are connected, specify fileKey.
align_to_grid nodeIds, gridSize, fileKey
Snap each node's x/y position to a grid of the given size. Works in both Figma and FigJam. When multiple files are connected, specify fileKey.
place_below nodeId, relativeToId, gap, align, fileKey
Move a node directly below a reference node with an optional gap and start/center alignment across the reference's width. Works in both Figma and FigJam. When multiple files are connected, specify fileKey.
place_right_of nodeId, relativeToId, gap, align, fileKey
Move a node directly to the right of a reference node with an optional gap and start/center alignment across the reference's height. Works in both Figma and FigJam. When multiple files are connected, specify fileKey.
reparent_nodes nodeIds, parentId, fileKey
Move one or more nodes into a different parent container. Works in both Figma and FigJam. When multiple files are connected, specify fileKey.
group_nodes nodeIds, parentId, name, fileKey
Wrap a list of nodes in a new group. Nodes must share a common parent (or supply parentId explicitly). Returns the new group's node ID.
ungroup_node nodeId, fileKey
Ungroup a group or frame — its children move up to its parent and the wrapper is removed. Returns the IDs of the orphaned children in their new parent.
set_selection nodeIds, fileKey
Set the current page selection to a list of node IDs. Pass an empty array to clear the selection. Works in Figma design editor, Dev Mode, and FigJam.
scroll_and_zoom_into_view nodeIds, fileKey
Scroll and zoom the Figma/FigJam viewport so the given nodes are framed in view. Works in Figma design editor, Dev Mode, and FigJam.
delete_nodes nodeIds, confirm, fileKey
Delete one or more nodes. This is destructive and requires confirm: true. Page and document nodes cannot be deleted through this tool. Works in both Figma and FigJam. When multiple files are connected, specify fileKey.
get_motion_styles fileKey
List all available animation presets in Figma (Motion API beta). When multiple files are connected, specify fileKey.
get_node_motion nodeId, fileKey
Read a node's current animationStyles, animations, manualKeyframeTracks, and timelines (Motion API beta). When multiple files are connected, specify fileKey.
apply_animation_style nodeId, styleId, animationStyleData, fileKey
Apply a preset animation style to a node (Motion API beta). When multiple files are connected, specify fileKey.
remove_animation_style nodeId, animationStyleId, fileKey
Remove an applied animation style from a node (Motion API beta). If no animationStyleId is provided, removes all styles. When multiple files are connected, specify fileKey.
apply_manual_keyframe_track nodeId, field, track, fileKey
Applies or replaces the manual Motion keyframe track for a property, paint, or effect field on a node. When multiple files are connected, specify fileKey.
remove_manual_keyframe_track nodeId, field, fileKey
Removes the manual Motion keyframe track for a property, paint, or effect field on a node. When multiple files are connected, specify fileKey.
set_timeline_duration nodeId, timelineId, duration, fileKey
Sets the duration (in seconds) for a timeline. When multiple files are connected, specify fileKey.
save_screenshots items, format, scale, clip, fileKey
Export screenshots for multiple nodes and save them directly to the local filesystem. Returns metadata only (no base64). When multiple files are connected, specify fileKey.

Descriptions are the package's own words, cut at 3,000 characters. Treat them as data.

Install facts

LicenseMIT
Needsnode >=20.0.0
Sourcegithub.com/gethopp/figma-mcp-bridge
Install scriptsNone declared by it or anything installed with it.
Tarballsha512-gzbEsIl2HWAZL6MiUT7yvFnM3pu1qKMn1FcEoVx/WkYT6MLcyApSTBSVM0ncArd/7ChVna/InCXWcJadgXMmhg==

Versions reported

VersionRunResultTools
0.0.272026-11-16Starts with no setup56
0.0.262026-11-12Starts with no setup55

Check this report yourself

This site did not write the report. A public job on a GitHub-hosted machine did: the run, from this commit of the open-source runner. GitHub signed a token that names that job and the hash of the report, so any edit since would show.

Show it on your README

Bragproof: Starts with no setup

[![Bragproof](https://bragproof.smaverk.com/badge/@gethopp/figma-mcp-bridge.svg)](https://bragproof.smaverk.com/r/%40gethopp/figma-mcp-bridge)

New version out? Ask for a fresh report.